5-Star Rated Service

Spray Foam Insulation for Homes and Buildings

Most calls we get start the same way: the AC runs all day and the house still feels muggy. In Lake Charles, that usually means air and moisture are getting in, not just heat.

Book Online
In less than 30 seconds
Step 1 of 3
5.0 Rating
Licensed & Insured
Certified Professionals

Most calls we get start the same way: the AC runs all day and the house still feels muggy. In Lake Charles, that usually means air and moisture are getting in, not just heat.

Common Issues We Solve

Cooling bill is high all summer long

Leaky attics and walls let hot, humid Gulf air pour into the house. The AC makes up the difference, running nearly nonstop. Spray foam cuts that air exchange at the source.

House feels humid even with AC running

Fiberglass batt insulation slows heat transfer but does nothing to stop moist air. Spray foam creates an air barrier that keeps outdoor humidity out of living spaces, walls, and crawl spaces.

Metal building drips condensation inside

Steel roofs and walls get cold at night and sweat when warm, humid air hits them. Closed-cell foam sprayed directly on the metal stops that condensation cycle completely.

Older home with raised floors and drafts

Pier-and-beam houses let outside air move freely under the floor. Spray foam in the crawl space seals the floor system and keeps conditioned air from escaping downward.

Open-Cell vs. Closed-Cell: Which One Do You Need

Open-cell foam is softer, expands more, and costs less per square foot. It works well in attics and interior walls where you need air sealing and sound dampening without a vapor barrier. Closed-cell foam is rigid, dense, and acts as its own vapor barrier. It is the right call for crawl spaces, metal buildings, exterior walls, and anywhere moisture intrusion is the main concern.

  • Open-cell: attic air sealing, interior walls, sound control
  • Closed-cell: crawl spaces, metal roofs, exterior walls, flood-prone areas
  • Closed-cell adds structural rigidity to wall assemblies
  • Some jobs use both: closed-cell on the exterior, open-cell inside

Why Air Sealing Matters More Than R-Value Here

Lake Charles summers are brutal and wet. The bigger enemy is not just heat, it is humid air moving through every gap in the building envelope. That moisture loads the AC, fogs windows, and feeds mold in wall cavities. Spray foam stops air movement. Fiberglass and blown cellulose slow heat but let moist air pass right through. In this climate, R-value alone is not enough.

Where Spray Foam Gets Installed

Every building is different. Common applications in this area include attic roof decks, rim joists, crawl space floors and walls, exterior wall cavities during new construction or gut renovations, and the interior surfaces of metal shops, barns, and commercial buildings. Homes rebuilt or re-roofed after Hurricanes Laura and Delta are good candidates, since those projects often exposed wall and attic cavities for the first time in decades.

  • Attic roof deck or floor
  • Crawl space walls and subfloor
  • Exterior wall cavities
  • Metal building roofs and walls
  • Rim joists and band joists

What Affects the Cost of a Spray Foam Job

Square footage is the biggest factor, but it is not the only one. Closed-cell foam costs more than open-cell because the material itself is denser. Tight or low attics take more time to work in. Existing insulation that needs removal adds labor. Crawl spaces with poor access cost more than open metal buildings. Getting a quote specific to your structure is the only way to know the real number.

Why Choose Spray Foam Insulation Lake Charles

Licensed & Insured

Fully licensed and insured for your protection.

Fast Service

Quick response times and same-day availability.

Upfront Pricing

No hidden fees. Know the cost before we start.

Satisfaction Guaranteed

We stand behind our work 100%.

Schedule Your Service

Fill out the form below to request an appointment.

Step 1 of 3Service Details

What Lake Charles Customers Say

Don't just take our word for it

Excellent service from start to finish. Professional, on time, and fair pricing. Highly recommend!

Sarah M.

They went above and beyond to solve our issue. Will definitely use again for future work.

James R.

Frequently Asked Questions

Can spray foam go over existing insulation?

Sometimes, but not always. Old, wet, or moldy insulation usually needs to come out first. Dry fiberglass batts in walls are sometimes left in place with foam sprayed over them. An installer can tell you after looking at what is there.

How long does spray foam last?

Spray foam is a permanent part of the building. It does not sag, settle, or absorb moisture the way fiberglass does. Properly applied closed-cell foam can last the life of the structure.

Is spray foam safe after it cures?

Yes. Once cured, spray foam is inert and stable. During application, the area needs to be ventilated and clear of people. Cure time is typically 24 hours before re-occupancy, though the installer will give you the specific window for your job.

Will spray foam work in a shop that already has condensation problems?

Closed-cell foam sprayed on the interior of the metal roof and walls eliminates the temperature difference that causes condensation. It is one of the most effective fixes for that problem in steel buildings.